High Temperature Resistant Centrifugal Pump Installer
nuevos productos
  • bomba autocebante fzb
    bomba autocebante de plástico flúor fzb

    Bomba autocebante de plástico de flúor fzb, de acuerdo con las normas internacionales, las piezas de desbordamiento son de plástico de flúor, las piezas de soporte de carga están hechas de materiales metálicos, pueden equiparse con un sello externo de máquina de un solo extremo, un sello externo de máquina de ensamblaje y agua de lavado, pueden ser Personalizado.

    Lee mas
  • bomba centrífuga de acero inoxidable
    bomba centrífuga de agua salada de agua salada de una sola etapa de acero inoxidable ih

    La bomba centrífuga de agua salada de agua salada de una sola etapa de acero inoxidable puede estar hecha de acero inoxidable 304.316.316l y acero de doble fase súper. Es una excelente bomba de transferencia y bomba de descarga para transportar diversas concentraciones de agua de mar, agua salada y solventes orgánicos.

    Lee mas
últimas noticias
bomba centrífuga de conexión directa con revestimiento de teflón ihf-d

bomba centrífuga de conexión directa con revestimiento de teflón ihf-d

La bomba centrífuga con revestimiento de flúor ihf-d es un producto mejorado de la bomba centrífuga con revestimiento de flúor ihf. lo que es más resi

ZX stainless steel self-priming horizontal acid-resistant and alkali-resistant centrifugal pump.

2020/05/09

Application of stainless steel self-priming centrifugal pump.
ZX self-priming pump is a horizontal self-priming centrifugal pump suitable for urban environmental protection, construction, fire fighting, chemical industry, pharmaceutical, electric power, electroplating, petroleum, mining, equipment cooling, oil tanker unloading and so on.
Characteristics of stainless steel self-priming centrifugal pump:

ZX self-priming centrifugal pump has the advantages of compact structure, convenient operation, smooth operation, easy maintenance, high efficiency and long service life.


Failure causes of stainless steel self-priming centrifugal pump:
1. ZX self-priming pump does not produce water.
The main results are as follows: 1. There is no liquid storage or insufficient liquid storage in the pump cover.
2. Air leakage in the suction pipe.
3. The rotational speed is too low.
4. The suction distance is too high or the suction line is too long.
5. The leakage of mechanical seal is too large.
6. The gas in the suction line cannot be discharged from the outlet.

2. ZX self-priming pump has a large noise and vibration.
1. The soles of the feet are unstable.
2. Bending of pump shaft.
3. Cavitation phenomenon.
4. Serious bearing wear.
5. There are sundries in the inlet pipeline.
6. The spindle of pump is different from that of electric motor.

Third, the method of self-suction and discharge of stainless steel:
1. Add enough liquid to store liquid.
2. Check and eliminate the phenomenon of air leakage.
3. Adjust the report.
4. Reduce the suction distance or shorten the suction line.
5. Repair or swap.
6. Make it excluded.
7. Reinforcement.
8. Replace or correct.
9. Adjust the working conditions.
10. Replace.
11. Get rid of sundries.
12. Adjust coaxiality


   

el equipo profesional al servicio !