+86 18130251359
teflowpumps@tlpumps.com
In terms of chemical properties, there is basically no difference in acidity between 98% sulfuric acid and pure sulfuric acid, and pure sulfuric acid still has strong acidity. Part of sulfur trioxide is released by decomposition at 290 ℃, and the boiling point is 338 °C, while the fuming sulfuric acid dissolving sulfur trioxide is a superacid system, which is more acidic than pure sulfuric acid.
Sulphuric acid pump chooses different pumps according to the density of sulfuric acid.
If the specific gravity is below 1.0~2.0kg/m3, fluorine-lined magnetic pump (TMF-S) is recommended.
2 when the specific gravity is below 1.3kg/m3, there is no need to increase the power of the motor power standard configuration.
(3) when the specific gravity is greater than 1.3kg/m3, the matching motor needs to calculate the actual shaft power of the pump.
(4) when selecting fluorine-lined magnetic pump, sulfuric acid can not contain a large number of particles, and the special pump developed and produced by the company can transport particles in about 5-8%.
5 dilute sulfuric acid can choose polymer and fluoroplastic centrifugal pump, and mechanical seal can choose hard wear material to prolong service life.
(6) under the negative pressure condition, the self-priming condition can be achieved by adding a siphon bucket (negative pressure tank). Specific treatment of specific working conditions, for example: hydrochloric acid pump, phosphoric acid pump, lye pump and so on. If you have any problems in type selection, please call 18130251359.
+86+0563-5093318
